The necessary conditions for the show are the same for a slide projection, the basic condition is the possibility to have a dark lounge.

If this is not possible, we need to darken at least the area where the screen is, and not the lounge, taking care that the screen area is 75-80% dark and that no direct light can hit the screen.
The artists are autonomous with: the projector, its shelf and the screen (until 3 x 3 meters, that is indicated for 300 people).
In case of flight transfers , for transportation difficulties, the screen (white for frontal projection) must be available where the show takes place.

The bottom of the screen must be at least at a height of 80 cm. from the floor where the projector is situated.
The screen location should be the best possible in visibility of the slides interacting with the shadows.
In front of the screen we need a 4.5 m. (minimum) corridor to locate the projector.

The artists will act in front of the screen, and the public will be able to see their hands and the shadows they create on the screen. The spot where the artists will stay must be 4 square meters wide.

On both sides of this area and of the corridor, the tables for the gala night can eventually be positioned. If a 5 m. long stage is not available, it is possible to place a base with a surface of 4 square m. approximately (30-40 cm. high) where the artists and the projector will be positioned.

This base has to be in front of the screen at a distance of 4.5 m. ( see the illustration). If the screen is more than 2 x 2 m. wide (3x3, 4x4 etc.) the distance will change proportionally with the measure of the screen. An electric plug (220 volts) with multiple sockets ( 4 ways socket-outlet) will be necessary on the stage for the projector.

We will need also an amplification adequate to the lounge (for 100 people we need at least a power of 250 w.) with mixer (with normal jack plugs), Hand Radio microphone, 2 CD player, Ipod connection (1/8'' stereo miniature jack)